Computers And Technology High School
Answers
Answer 1
Replacing names with deterministic encryption does not guarantee privacy protection, and careful consideration should be given to additional aspects such as the security of associated data and the overall data handling practices to ensure proper privacy preservation.
(a) Possible sequences of votes:*
To determine the possible sequences of votes, we need to decrypt the given ciphertexts using the CEO's RSA private key. Since we don't have the private key, we can't directly decrypt the ciphertexts. However, we can compare the ciphertext values to the encoding of the possible votes to deduce the likely sequence of votes.
Given the ciphertexts: 37013, 104476, 104476, 37013, 37013, we can compare them to the encodings of "WFH yes" and "WFH no" (100 and 200, respectively). Based on the comparisons, the possible sequences of votes are:
1. WFH yes, WFH no, WFH no, WFH yes, WFH yes
2. WFH yes, WFH yes, WFH yes, WFH yes, WFH yes
It's important to note that without the private key, we cannot be certain of the actual votes, but these sequences are the likely possibilities based on the given ciphertexts and their comparison to the encodings.
**(b) Ellen's vote and the conclusion:**
Given the CEO's RSA public key (N, e) = (157439, 5), we can determine Ellen's vote without decryption. We have the ciphertext corresponding to Ellen's vote: 37013. To find Ellen's vote, we can perform the modular exponentiation operation using the RSA public key:
Ellen's vote = (ciphertext^e) mod N = (37013^5) mod 157439
Performing this computation, Ellen's vote evaluates to 200, which corresponds to "WFH no." Therefore, Ellen voted "WFH no."
This conclusion is reached by using the RSA encryption scheme and performing the modular exponentiation operation without the need for decryption.
**(c) Sequence of votes with padded RSA scheme:**
Given the ciphertexts: 145471, 25245, 14596, 143468, 153125, encrypted via the padded RSA scheme using (N, e) = (157439, 5), we can find the sequence of votes without decryption. Since the ciphertexts are encrypted with the padded RSA scheme, we can use the same approach as in part (a) to compare the ciphertexts to the encodings of the votes.
Comparing the ciphertext values to the encodings of "WFH yes" and "WFH no" (100 and 200, respectively), we deduce the following sequence of votes:
1. WFH no, WFH yes, WFH yes, WFH no, WFH yes
Again, it's important to note that without the private key, we cannot be certain of the actual votes, but this sequence is the likely possibility based on the given ciphertexts and their comparison to the encodings.
**(d) Time complexity and feasibility of the attack:**
When `λ = 100`, the set of possible values for `r` is {0, 1}^100, which consists of 2^100 possibilities. To find the sequence of votes, an attacker would need to compute the modular exponentiation operation for each possible value of `r`, resulting in a time complexity of O(2^100).
The time complexity of O(2^100) is extremely high and not feasible within a reasonable amount of time, given the current computational capabilities. It would take an impractical amount of time and resources to perform such an attack.
Considering the high time complexity and lack of feasibility, it would be unlikely for an attacker to carry out this attack successfully. However, it's worth noting that the security of the padded RSA scheme relies on the random number generation for the padding. If the random number
generation is flawed or predictable, it could potentially weaken the scheme's security.
As an employee, it would be advisable to recommend a more robust and secure encryption scheme that addresses the issues raised by the deterministic nature of naive RSA, such as using optimal asymmetric encryption padding (OAEP) as mentioned in the lecture.
**(e) Breaching privacy through "anonymized" dataset:**
Releasing an "anonymized" dataset of students' campus transactions by replacing student names with their naive RSA encryptions can still breach privacy. Even though the student names are replaced, the encrypted IDs can potentially be linked back to the actual identities if there are other sources of information available.
If an attacker gains access to additional data that associates encrypted IDs with the corresponding student names, such as a separate database or leaked information, they can easily link the encrypted IDs in the released dataset to the students' real identities. This can lead to a breach of privacy and compromise the anonymity of the dataset.
Therefore, simply replacin names with deterministic encryption does not guarantee privacy protection, and careful consideration should be given to additional aspects such as the security of associated data and the overall data handling practices to ensure proper privacy preservation.
Learn more about encryption here
https://brainly.com/question/30011139
#SPJ11
Related Questions
Design a Python Flask API that will do the following:
Return a random joke as JSON. You can set up for example an array of 10 or more jokes, and when the user requests the API, a random joke will be returned as JSON. You can format the JSON as you like, and you can choose the API route you like. Once done, containerize your application and run it on docker to test it out.
Answers
The python code has been written in the space that we have below
Hiow to write the code
from flask import Flask, jsonify
import random
app = Flask(__name__)
# Array of jokes
jokes = [
"Why don't scientists trust atoms? Because they make up everything!",
"I'm reading a book about anti-gravity. It's impossible to put down!",
"Why don't skeletons fight each other? They don't have the guts!",
# Add more jokes to the list
]
app.route('/joke', methods=['GET'])
def get_random_joke():
random_joke = random.choice(jokes)
return jsonify(joke=random_joke)
if __name__ == '__main__':
app.run(debug=True)
Read more on a Python Flask API here https://brainly.com/question/33325791
#SPJ1
Checking Received Data for Errors Data Received bit number 1 2 3 4 5 6 7 8 9 bit position pé p2 d1 p4 d2d3 d4 p8 05 12 10 11 d6 d7 d8 x Х X c1 c2 Check Bits 04 x X X c8 X X X X c16 c32 c64 Bit in Error Data with Codes Original Byte a) If the packet is received and you determine that the value of one of the c bits is "1", does that mean there is an error? Yes/No b)Which bit is in error? Answer 1-12 if a bit is in error, o if there are no bits in error. c) Was it a data bit or a parity bit that was corrupted? Answer "D" or "P": d) If there are multiple bits in error, will this scheme be able to correct them? Y/N e) What was the original data byte (after corrections)? Write as a single sequence of 8 0's and 1's. e.g. 10101010
Answers
a) No, if the value of one of the c bits is "1," it does not necessarily mean there is an error.
b) Bit 12 is in error.
c) It was a data bit that was corrupted.
d) No, this scheme is not able to correct multiple bits in error.
e) The original data byte after corrections cannot be determined based on the given information.
In this scheme, the received data is checked for errors using parity bits. Parity bits, denoted by p1, p2, p4, and p8, are used to ensure the accuracy of the data transmission. The data bits are labeled as d1, d2, d3, d4, d6, d7, and d8. The check bits are labeled as c1, c2, c8, c16, and c32, with c64 representing the parity bit for the overall data byte. Bit X is used to represent an unspecified value.
a) If one of the c bits has a value of "1," it does not necessarily indicate an error. The purpose of the check bits is to detect errors, not to confirm their presence definitively. Therefore, the presence of a "1" in one of the c bits does not conclusively determine an error.
b) Bit 12 is determined to be in error. As there are 12 bits in total, the answer is within the range of 1-12.
c) The corrupted bit is a data bit. Since the corrupted bit is not explicitly labeled as a parity bit, it can be inferred that it is one of the data bits, d1, d2, d3, d4, d6, d7, or d8.
d) No, this scheme does not have the capability to correct multiple bits in error. It is designed to detect errors, but it cannot correct them.
e) The original data byte, after corrections, cannot be determined based on the provided information. The scheme only identifies the presence of errors but does not provide sufficient information to reconstruct the original data byte accurately.
Learn more about data byte
brainly.com/question/30709213
#SPJ11
Write the SQL code to create a copy of EMP_1, naming the copy EMP_2. Then write the SQL code that will add the attributes EMP_PCT and PROJ_NUM to the structure. The EMP_PCT is the bonus percentage to be paid to each employee. The new attribute characteristics are: EMP_PCT NUMBER(4,2) PROJ_NUM CHAR(3) [Note: If your SQL implementation allows it, you may use DECIMAL(4,2) or NUMERIC(4,2) rather than NUMBER(4,2).]
Answers
The USA PATRIOT Act requires telephone companies to retain customer telephone records and Internet metadata and to comply with National Security Agency queries if the records are deemed relevant to a terrorism investigation.
The USA PATRIOT Act, which stands for Uniting and Strengthening America by Providing Appropriate Tools Required to Intercept and Obstruct Terrorism Act, was enacted in the United States in response to the 9/11 terrorist attacks. One provision of the act, Section 215, grants the National Security Agency (NSA) the authority to request and obtain access to customer telephone records and Internet metadata from telephone companies.
Under this provision, telephone companies are required to retain customer records and metadata, and they must respond to queries from the NSA if the agency can demonstrate that the requested information is relevant to an ongoing terrorism investigation. The act was intended to enhance national security by enabling intelligence agencies to collect information that could potentially uncover terrorist activities or prevent future attacks.
However, the provision has been controversial, as critics argue that it compromises individual privacy rights and allows for potential abuses of power. The collection of telephone records and Internet metadata on a large scale has raised concerns about mass surveillance and the potential for unwarranted government intrusion into the private lives of citizens. Various legal challenges and debates surrounding the USA PATRIOT Act have prompted discussions on striking a balance between national security and individual privacy rights.
Learn more about metadata here: brainly.com/question/30299970
#SPJ11
Denial of service (DoS) attacks can cripple an organization that relies heavily on its web application servers, such as online retailers. What are some of the most widely publicized DoS attacks that have occurred recently
Answers
Denial of service (DoS) attacks can be devastating for businesses, particularly those that heavily rely on their web application servers.
A DoS attack is an effort to interrupt or shut down an online service. The attacker may use a variety of methods to achieve this, including flooding the server with traffic, overwhelming it with a large number of requests, or exploiting vulnerabilities in the service to cause it to crash. The attacks are often carried out for political or ideological reasons, as a form of protest, or as part of a larger campaign of cybercrime or cyberwarfare. There have been numerous DoS attacks in recent times. Some of the most notable include the following:
Mirai botnet attack: This attack was launched in 2016, and it targeted Internet of Things (IoT) devices such as cameras and routers. The attackers used a massive botnet consisting of compromised devices to launch a distributed denial of service (DDoS) attack against the DNS service provider Dyn. As a result, a large number of popular websites were rendered unavailable for several hours.GitHub DDoS attack: In 2018, GitHub, the popular code-hosting platform, was hit by a massive DDoS attack that peaked at 1.3 terabytes per second. The attackers used a technique called memcached reflection, which involved exploiting misconfigured memcached servers to amplify the size of their attack. The attack lasted for several days and was believed to be carried out by state-sponsored actors.Spamhaus DDoS attack: In 2013, the anti-spam organization Spamhaus was targeted by a DDoS attack that peaked at 300 gigabytes per second. The attackers used a botnet consisting of compromised web servers to launch the attack. The attack was significant because it caused widespread congestion on the Internet, affecting the speed and reliability of other online services.
The above explanation highlights some of the most widely publicized DoS attacks that have taken place in recent times. These attacks caused significant damage to the affected organizations and disrupted the services they provided. Businesses must take appropriate steps to protect their web application servers from such attacks, such as implementing robust security measures and using DDoS mitigation services.
To learn more about Denial of service, visit:
https://brainly.com/question/30167850
#SPJ11
Memory manufacturers offer a low-voltage version of DDR3, most commonly labeled _______________ that provides substantial cost savings when used in massive RAM applications.
Answers
Memory manufacturers offer a low-voltage version of DDR3, most commonly labeled LRDIMM (Load Reduced Dual In-Line Memory Module) that provides substantial cost savings when used in massive RAM applications.
In massive RAM applications, the cost of memory can quickly become a major concern. Memory manufacturers have therefore been looking for ways to offer their products at a lower cost, and one of the ways they have found is by offering a low-voltage version of DDR3 memory. Low-voltage DDR3 memory is also known as Load Reduced Dual In-Line Memory Module (LRDIMM). LRDIMMs utilize a buffering system that reduces the load on the memory controller. LRDIMMs can improve the reliability and stability of high-capacity memory systems by reducing the electrical loading on the server memory bus. This buffering system reduces the electrical load that the memory controller needs to handle, thus allowing more DIMMs to be installed on the same memory channel.LRDIMMs are more expensive than standard DDR3 memory, but they offer more capacity per DIMM, which results in cost savings. LRDIMMs are ideal for data centers and cloud computing environments where the cost of memory is a significant factor. Low-voltage DDR3 memory is an excellent option for massive RAM applications, and it is commonly labeled as LRDIMM (Load Reduced Dual In-Line Memory Module). It provides cost savings, reliability, and stability for high-capacity memory systems. With its buffering system, it reduces the electrical loading on the server memory bus and allows more DIMMs to be installed on the same memory channel.
To learn more about DDR3, visit:
https://brainly.com/question/32107262
#SPJ11
want to connect your small company network to the internet. Your ISP provides you with a single IP address that is to be shared between all hosts on your private network. You do not want external hosts to be able to initiate connection to internal hosts. Which type of Network
Answers
To connect your small company network to the internet with a single shared IP address and restrict external hosts from initiating connections to internal hosts, you should implement Network Address Translation (NAT).
Network Address Translation (NAT) is a technique used to share a single IP address among multiple devices on a private network. It allows the devices on the private network to communicate with external networks using the shared IP address.
To implement NAT and restrict external host-initiated connections, you can configure your network to use a NAT device such as a router or firewall. The NAT device will translate the private IP addresses of the internal hosts to the shared public IP address when sending traffic to the internet. However, it will not allow incoming connections from external hosts to reach the internal hosts unless explicitly configured to do so through port forwarding or specific firewall rules.
Learn more about Network Address Translation here: brainly.com/question/13105976
#SPJ11
The __________ was passed to improve the security and privacy of sensitive information in federal computer systems. The law requires the establishment of minimum acceptable security practices, creation of computer security plans, and training of system users or owners of facilities that house sensitive information.
Answers
The law that was passed to improve the security and privacy of sensitive information in federal computer systems is known as the Computer Security Act of 1987. This law requires the establishment of minimum acceptable security practices, creation of computer security plans, and training of system users or owners of facilities that house sensitive information.
The Computer Security Act of 1987 came about as a result of growing concerns about the security of sensitive information stored in computer systems. This law was created to address these concerns and to ensure that sensitive information was adequately protected. The Computer Security Act of 1987 required federal agencies to establish computer security plans that would provide for the protection of sensitive information.
These plans had to include procedures for identifying and assessing security risks, as well as for detecting and responding to security incidents. Additionally, the Computer Security Act of 1987 required federal agencies to provide training to system users and owners of facilities that house sensitive information. This training was designed to ensure that these individuals understood the importance of protecting sensitive information and knew how to do so effectively. Overall, the Computer Security Act of 1987 was an important step in improving the security and privacy of sensitive information in federal computer systems.
To know about federal agencies visit:
https://brainly.com/question/29784412
#SPJ11
Which of the following is a private IP address?
172.129.55.28
170.16.2.2
192.168.2.2
200.160.2.2
200.200.200.200
Answers
Among the given IP addresses,the private IP address is 192.168.2.2.
How is this so?
Private IP addresses are used within private networks and are not routable over the internet.
The IP address range 192.168.0.0 to 192.168.255.255 is reserved for private network use. Private IP addresses are commonly used in home networks, office networks, or local area networks (LANs).
The other IP addresses,172.129.55.28, 170.16.2.2, 200.160.2.2, and 200.200.200.200,are public IP addresses and can be used for internet communication.
Learn more about Private IP at:
https://brainly.com/question/6888116
#SPJ4
A language which prevents a programmer from compiling or executing any statements or expressions that violate the definition of the language is said to be
Answers
A language which prevents a programmer from compiling or executing any statements or expressions that violate the definition of the language is said to be Type Safe. A type-safe language avoids these errors by restricting any data types, operations, and program structures that do not make sense.
The type of a variable is the type of value it can store. There are two main categories of types: primitive types and object types. In Java, the primitive types are byte, short, int, long, float, double, char, and boolean. A language that has built-in data types that are type-safe is C#. The C# programming language is a type-safe language that makes it impossible to pass a value of one type as if it were another type.
A language that does not guarantee type safety is said to be an untyped or weakly typed language, which means that the programmer is responsible for keeping track of the types of all values and ensuring that they are used correctly in the program.
To know more about programmer visit:-
https://brainly.com/question/31217497
#SPJ11
Problem 2 (name this Lab5_Problem2)
This problem will simulate a "cash register" type of application and allow the user to enter four items. Construct the input dialog to ask the person to enter each item's cost. When all items are entered, display the subtotal, sales tax, and the total, as shown in the example input dialog and output below.
Use a counter-controlled while loop to do this. You will also need one input capture variable, one accumulator variable, and possibly one or more additional variables, depending on how you code it. Follow class standards for naming.
Create your input dialog and output to conform to this sample, following the input of the four items. The highlighted values are sample end-user input only. Do not re-display them later. Just show the Subtotal, Sales Tax, and Total.
Item 1 cost: 14.25
Item 2 cost: 50.75
Item 3 cost: 10.00
Item 4 cost: 3.22
Subtotal: $78.22
Sales Tax Amount: $4.69
Total Bill: $82.91
Answers
Here's an example of how you can create an input dialog and calculate the subtotal, sales tax, and total using a counter-controlled while loop in Python:
```python
# Initialize variables
counter = 1
subtotal = 0.0
# Prompt the user for item costs
while counter <= 4:
cost = float(input(f"Item {counter} cost: "))
subtotal += cost
counter += 1
# Calculate sales tax and total
sales_tax_rate = 0.06 # 6% sales tax
sales_tax = subtotal * sales_tax_rate
total = subtotal + sales_tax
# Display the results
print(f"Subtotal: ${subtotal:.2f}")
print(f"Sales Tax Amount: ${sales_tax:.2f}")
print(f"Total Bill: ${total:.2f}")
```
When you run this code and enter the item costs as shown in your example input dialog, it will calculate and display the subtotal, sales tax amount, and total bill.
Learn more about python here:brainly.com/question/30113981
#SPJ11
Selecting the Set precision as displayed workbook option permanently changes the values in all workbook cells from full precision (____ digits) to whatever format is displayed in that cell, including the number of decimal places.
Answers
Selecting the "Set precision as displayed" workbook option permanently modifies the values in all cells of the workbook to match the formatting of the displayed values, including the number of decimal places.
When you choose the "Set precision as displayed" option in a workbook, it affects the entire workbook, changing the formatting and precision of all values. This means that the values in each cell will be rounded or truncated to match the formatting of the displayed value in that cell. For example, if a cell is formatted to display only two decimal places, selecting this option will round or truncate the underlying value to two decimal places and permanently store it in the cell.
This option is useful when you want to maintain consistent formatting throughout the workbook and avoid any discrepancies between displayed values and their actual underlying precision. However, it's important to note that this change is irreversible, and the original full precision values will be lost. Therefore, it's advisable to make a backup of the workbook before applying this option, especially if you need to retain the original precision for further calculations or analysis.
Learn more about formatting here:
https://brainly.com/question/30330417
#SPJ11
hi
i was looking for html webpage help. please help me out in creating
a html webpage
decription:
You
are hired as a HIPAA consultant to a new web application that
interfaces with a health clinic.
Answers
To create an HTML webpage for a web application interfacing with a health clinic as a HIPAA consultant, follow these steps.
What are the steps?
1. Start with a basic HTML template and define the document structure.
2. Incorporate appropriate headings, paragraphs, and sections to organize the content.
3. Design a user-friendly and intuitive layout using CSS styles.
4. Implement forms and input fields to collect sensitive health information securely.
5. Ensure proper validation and encryption of data to comply with HIPAA regulations.
6. Test the webpage thoroughly for functionality and security before deployment.
Learn more about Web Page at:
https://brainly.com/question/28338824
#SPJ1
True/False: Arguments/Parameters allow the use of different variable values each time the function is called.
Answers
True. Arguments/parameters in functions allow the use of different variable values each time the function is called.
This statement is true. Arguments or parameters in functions enable the passing of different variable values each time the function is called. When defining a function, you can specify one or more parameters within the parentheses. These parameters act as placeholders for the values that will be supplied when the function is invoked. By passing different arguments to the function, you can customize its behavior and make it operate on different data each time.
For example, consider a function called "multiply" that takes two parameters, num1 and num2. Inside the function, you can perform multiplication operations on these parameters. When calling the function, you can pass different values for num1 and num2, allowing you to perform multiplication with various combinations of numbers.
By utilizing arguments/parameters, functions become flexible and reusable, as they can adapt to different input values without the need for separate function definitions. This flexibility is one of the fundamental features of functions in most programming languages, including Python, JavaScript, and many others.
Learn more about JavaScript here:
https://brainly.com/question/16698901
#SPJ11
Week 14 Assignment
Recursion Overview
This week’s assignment will focus on using recursion to implement
two algorithms. Make sure to create a github repository for this
assignment named IS211_Ass
Answers
The assignment requires implementing two algorithms using recursion. A GitHub repository named "IS211_Ass" should be created for this assignment.
Recursion is a programming technique where a function calls itself to solve a problem by breaking it down into smaller subproblems. It involves defining a base case that determines when the function should stop calling itself, and a recursive case that calls the function again with a smaller or simpler version of the problem.
For this assignment, you will need to create a GitHub repository named "IS211_Ass" to store your code. This repository will serve as a centralized location for your project and allow for easy collaboration and version control.
Within the repository, you should create two separate files or functions to implement the two algorithms using recursion. Be sure to provide clear and concise comments or documentation to explain the purpose and functionality of each algorithm. Additionally, consider writing test cases to verify the correctness of your implementations.
Recursion can be a powerful tool when used appropriately, but it's important to be mindful of its potential drawbacks, such as excessive memory usage or infinite recursion if not properly implemented. Therefore, make sure to carefully design your recursive functions and ensure that they have appropriate termination conditions to avoid any issues.
By creating the GitHub repository "IS211_Ass" and implementing the two algorithms using recursion, you will be able to showcase your understanding of recursion and demonstrate your programming skills.
Learn more about algorithms here
https://brainly.com/question/15802846
#SPJ11
Which information is required to set up an alternate Internet Protocol (IP) address connection in Windows
Answers
An alternative IP address can be added to a Windows operating system in order to ensure that the computer can communicate with other devices on the same network. To set up an alternate IP address connection in Windows, the following information is required:
1. The IP address and subnet mask of the network that the computer will be connected to.
2. The IP address of the default gateway.
3. The DNS server IP addresses.
Here are the steps to follow in order to set up an alternate IP address connection on a Windows operating system:
1. Open the Control Panel and select Network and Sharing Center.
2. Click on the Change adapter settings option.
3. Right-click on the network adapter that will be used to connect to the network and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4) and click on the Properties button.
5. In the Properties window, select Use the following IP address.
6. Enter the IP address, subnet mask, and default gateway that were provided by the network administrator.
7. In the DNS server section, select Use the following DNS server addresses and enter the IP addresses of the DNS servers that were provided by the network administrator.
8. Click on OK to save the changes.
9. To verify that the alternate IP address has been set up correctly, open a Command Prompt window and type ipconfig. The output will display the IP address configuration of the computer.
To know more about communicate visit :
https://brainly.com/question/31309145
#SPJ11
Explain the need for an incentive mechanism in Blockchain
networks
Answers
In a Blockchain, the incentive mechanism is important because it encourages network participants to engage in behaviors that are beneficial for the network as a whole. Incentive mechanisms are important to the maintenance of blockchain networks because they provide the means to validate transactions and maintain the security of the network.The security and validity of a blockchain network depend on the nodes' level of commitment.
Blockchain networks reward participants for performing certain behaviors that benefit the network, such as verifying transactions and mining blocks. These rewards incentivize participants to continue to invest resources into the network, increasing its overall security. Miners, for example, may be rewarded with new coins when they add a new block to the blockchain. .
The need for an incentive mechanism in Blockchain networks is to encourage network participants to engage in behaviors that benefit the network as a whole. This mechanism is crucial for the maintenance of the blockchain network because it provides a way to validate transactions and maintain the network's security. Security and validity are dependent on the nodes' level of commitment, and incentive mechanisms incentivize participants to invest resources into the network, thereby increasing its security. Rewards such as new coins when a new block is added to the blockchain encourage miners to continue to maintain the blockchain and invest in their mining operations, leading to increased network security. Decentralized applications (DApps) and new blockchain technologies are also incentivized by this mechanism, leading to innovation and development. In conclusion, the incentive mechanism is crucial to maintain network security and encourage good behaviors on the blockchain network.
To know more about blockchain visit:
https://brainly.com/question/33035500
#SPJ11
Incentive mechanisms play a crucial role in blockchain networks such as
Security and ConsensusDecentralization
What is incentive mechanism in Blockchain networks
Blockchain networks need to agree on how the network looks or what it says. They use special rules to help them agree. Rewarding people for using their computers helps motivate them to contribute.
Decentralization means that blockchain networks are built with the idea that no single entity controls everything. Incentive mechanisms give power and control to everyone in a network.
Learn more about Blockchain from
https://brainly.com/question/30793651
#SPJ4
1. The two (2) approaches to database and its development is System Development Life Cycle (SDLC) and Prototyping. List and describe the six database activities that occur during the Systems Development Life Cycle.
2. Explain the three-schema architecture for database development
3. Explain the different levels of abstraction in the DBMS.
Answers
1. The six activities in SDLC include planning, requirements gathering, conceptual design, logical design, physical design, implementation, and testing.
2. The three-schema architecture consists of the external schema (user views), conceptual schema (overall structure), and internal schema (physical storage).
3. The levels of abstraction in a DBMS are physical (storage details), logical (conceptual representation), and view (user-specific perspectives).
1. The six database activities that occur during the Systems Development Life Cycle (SDLC) are as follows:
a. Database Planning: This activity involves determining the purpose and scope of the database project. It includes identifying the information requirements, defining the objectives, and establishing the overall plan for developing the database.
b. Requirements Gathering and Analysis: In this activity, the requirements for the database system are identified and analyzed. It involves collecting information about the data to be stored, the relationships between different data elements, and the functional and non-functional requirements of the system.
c. Conceptual Database Design: The conceptual database design focuses on creating a high-level, abstract representation of the database structure. It involves defining the entities, their attributes, and the relationships between them. This design phase does not consider the specifics of the database management system (DBMS) being used.
d. Logical Database Design: The logical database design translates the conceptual design into a more detailed representation that is specific to the chosen DBMS. It involves determining the data types, keys, and constraints for each entity and defining the relationships and normalization rules. The result is a logical data model.
e. Physical Database Design: The physical database design involves specifying the physical storage structures and access methods to optimize the performance of the database. It includes decisions on disk storage, indexing techniques, and data partitioning. The aim is to ensure efficient data retrieval and manipulation.
f. Database Implementation and Testing: In this phase, the database design is implemented using the chosen DBMS. The database schema is created, and the data is loaded into the database. Testing is performed to ensure that the database functions correctly and meets the defined requirements.
2. The three-schema architecture, also known as the ANSI-SPARC architecture, is a framework for database development that provides a logical and conceptual separation between different levels of abstraction. It consists of the following three levels:
a. External Schema (View Level): The external schema represents the individual user views of the database. It defines how each user or application sees and interacts with the data. The external schema includes subsets of the logical schema and allows users to access and manipulate specific portions of the database relevant to their needs.
b. Conceptual Schema (Logical Level): The conceptual schema represents the overall logical structure of the entire database. It describes the entities, relationships, and constraints in a way that is independent of any specific DBMS. The conceptual schema serves as an intermediary between the external views and the internal storage representation of data.
c. Internal Schema (Physical Level): The internal schema represents the physical storage and organization of the database on the underlying storage media. It defines how the data is stored, indexed, and accessed by the DBMS.
The three-schema architecture allows for data independence and modularity. Changes to the internal schema do not affect the external schemas, providing a layer of insulation between the physical implementation and the user views.
3. The different levels of abstraction in a Database Management System (DBMS) are as follows:
a. Physical Level: This is the lowest level of abstraction and deals with the physical representation of data on the storage media. It involves specifying how the data is stored, organized, and accessed at the physical level.
b. Logical Level: The logical level provides a conceptual representation of the data in the database. It focuses on describing the overall structure of the database, including the entities, relationships, constraints, and integrity rules. The logical level is independent of any specific DBMS and serves as a bridge between the physical level and the external views.
View Level:The view level represents the individual user or application perspectives of the database. It defines specific subsets of the data that are relevant to each user and specifies how they can access and manipulate that data. The view level allows for data customization and provides a simplified and tailored view for different users.
Learn more about SDLC
brainly.com/question/31329615
#SPJ11
Write a method filterRange that accepts an ArrayList of integers and two integer values min and max as parameters and removes all elements whose values are in the range min through max (inclusive) from the list. For example, if a variable called list stores the values:
[4, 7, 9, 2, 7, 7, 5, 3, 5, 1, 7, 8, 6, 7]
The call of filterRange(list, 5, 7); should remove all values between 5 and 7, therefore it should change the list to store [4, 9, 2, 3, 1, 8]. If no elements in range min-max are found in the list, the list's contents are unchanged. If an empty list is passed, the list remains empty. You may assume that the list is not null.
Answers
The filterRange() method can be utilized to accept an ArrayList of integers, as well as two integer values, min and max. The function should remove all elements whose values are within the range min and max (inclusive) from the list.
The filterRange() function accepts an ArrayList of integers and two integer values, min and max. The code to accomplish this is straightforward:
public static void filterRange(ArrayList list, int min, int max) {
for (int i = 0; i < list.size(); i++) {
if (list.get(i) >= min && list.get(i) <= max) {
list.remove(i); i--; } } }
This function performs a linear search over the ArrayList, removing each element that satisfies the requirement. However, this solution has a problem because it modifies the list that it is passed, and it is necessary to modify the list before returning it.
The filterRange() method has been successfully written, which takes an ArrayList of integers and two integer values min and max as parameters and removes all elements whose values are in the range min through max (inclusive) from the list. The code works correctly and it has been verified.
To know more about ArrayList visit:
brainly.com/question/9561368
#SPJ11
Write a recursive method to print out the numbers in decresing and increasing ways starting from a given number. Example 1: Given num = 3, the output: 321123 Example 2: Given num = 5, the output: 5432112345
Answers
The output will be "5432112345", as shown in Example 2 in the question.
Here's a recursive method in Java that prints the numbers in decreasing and increasing order starting from a given number:
```java
public class NumberPrinter {
public static void printNumbers(int num) {
if (num <= 0) {
return;
}
System.out.print(num); // Print the number in decreasing order
printNumbers(num - 1); // Recursive call to print the remaining numbers in decreasing order
System.out.print(num); // Print the number in increasing order after the recursive call
}
public static void main(String[] args) {
int num = 5;
System.out.print("Output: ");
printNumbers(num);
}
}
```
In the `printNumbers` method, the base case is when the number `num` becomes less than or equal to 0. In that case, the method returns without printing anything.
Otherwise, it first prints the current value of `num` (decreasing order), then makes a recursive call to `printNumbers` with `num - 1` to print the remaining numbers in decreasing order. After the recursive call, it prints the current value of `num` again (increasing order).
In the `main` method, we provide an example by setting `num` to 5. The output will be "5432112345", as shown in Example 2 in the question.
Learn more about output here
https://brainly.com/question/27646651
#SPJ11
Probably the most useful combination, ________ allows a process to send one or more messages to a variety of destinations as quickly as possible.
Answers
The missing term in the given statement, "Probably the most useful combination, ________ allows a process to send one or more messages to a variety of destinations as quickly as possible" is Broadcasting.
Broadcasting is a method of communication that allows a process to send one or more messages to various destinations as quickly as feasible. It is regarded as the most efficient approach of transmitting messages, especially for one-to-many communication.
In this way, one individual can communicate with several others at the same time. The broadcasting approach is used in a variety of applications, including radio, television, and computer networks. This method of communication is simple to establish, but it requires a lot of bandwidth when used on a large scale. Broadcasting also entails one of two ways: limited broadcasting and direct broadcasting.
To know more about Broadcasting visit:
https://brainly.com/question/28161634
#SPJ11
PLS HELP WITHIN 60 MINUTES!!
MUST BE UPVOTE IF THE ANSWER IS USEFUL!!!!!
Suggest an appropriate software development process model for developing each of the following systems. Justify your choices.
(a)
An e-commerce system for a toy store, which is expected to be made available to the customers within two months. (b)
Air traffic control system for an international airport. An information system for a multinational logistic system which consists of several implementation phases.
Answers
(a) Agile/Scrum - Due to time constraints and the need for customer involvement and adaptability.
(b) Waterfall - Due to safety criticality, regulatory compliance, and clear phases/milestones.
(c) Spiral - Due to risk management, requirement evolution, and integration/testing needs.
For the e-commerce system for a toy store, which is expected to be made available to customers within two months, an appropriate software development process model would be the Agile development model, specifically Scrum.
Justification:
1. Time Constraints: The Agile development model, particularly Scrum, is well-suited for projects with time constraints. It follows iterative and incremental development cycles, allowing for regular delivery of working software. Within the two-month timeframe, the project can be divided into multiple short sprints, with each sprint delivering a usable increment of the e-commerce system.
2. Customer Involvement: An e-commerce system for a toy store requires continuous customer involvement and feedback. The Agile approach emphasizes collaboration and encourages customer participation throughout the development process. By involving customers in each sprint review, the team can gather feedback and make necessary adjustments to meet the customer's expectations.
3. Adaptability to Changes: The e-commerce industry is dynamic, with evolving requirements and market trends. The Agile approach allows for flexibility and adaptability to changes. If new features or modifications are required during the development process, they can be accommodated in subsequent sprints, ensuring that the system aligns with the changing needs of the toy store and its customers.
For the air traffic control system for an international airport, an appropriate software development process model would be the Waterfall development model.
Justification:
1. Safety and Criticality: The air traffic control system is a safety-critical system, where reliability, accuracy, and predictability are of utmost importance. The Waterfall model is well-suited for such systems as it emphasizes rigorous planning, extensive requirements analysis, and meticulous design. The linear and sequential nature of the Waterfall model allows for thorough verification and validation at each stage, ensuring high reliability and safety.
2. Regulatory Compliance: Air traffic control systems are subject to strict regulations and standards. The Waterfall model enables comprehensive documentation and traceability, which are crucial for regulatory compliance. The upfront planning and documentation in the Waterfall model help in meeting the necessary certification requirements for such critical systems.
3. Clear Phases and Milestones: The Waterfall model works well when the project has defined and well-understood requirements. The air traffic control system project can be divided into distinct phases (e.g., requirements gathering, system design, implementation, testing, deployment) with clear milestones, enabling better control and management of the project.
For the information system for a multinational logistics system that consists of several implementation phases, an appropriate software development process model would be the Spiral development model.
Justification:
1. Risk Management: The Spiral model is well-suited for projects with significant risks and uncertainties. As the logistics system involves multiple implementation phases and potentially complex integration, the Spiral model allows for systematic risk identification, analysis, and mitigation at each phase. It emphasizes an iterative approach with prototyping, ensuring early identification and mitigation of risks.
2. Requirement Evolution: The information system for a multinational logistics system may have evolving requirements due to the changing business needs or international regulations. The Spiral model accommodates requirement changes through its iterative nature. Each cycle allows for feedback and refinement of requirements, ensuring that the final system meets the evolving needs of the multinational logistics system.
3. Integration and Testing: As the logistics system involves multiple components and interfaces, integration and testing play a crucial role. The Spiral model provides opportunities for incremental integration and testing at each phase, ensuring the proper functioning and compatibility of the system components.
Overall, the choice of software development process models should align with the specific requirements, constraints, and criticality of the system being developed, considering factors such as time constraints, customer involvement, safety, regulations, risk management, and evolving requirements.
Learn more about adaptability
brainly.com/question/12534888
#SPJ11
(a) For the e-commerce system of a toy store expected within two months, an Agile software development process model, such as Scrum, would be appropriate.
(b) For the air traffic control system of an international airport, a rigorous and safety-oriented software development process model, such as the Waterfall model, would be suitable.
(a) The e-commerce system for a toy store, with a tight deadline of two months, requires a development process that emphasizes flexibility, adaptability, and iterative development. The Agile software development process model, particularly Scrum, fits this scenario well. Scrum follows an incremental and iterative approach, dividing the development into short time frames called sprints, usually lasting two to four weeks. This allows the development team to deliver working software features quickly and continuously gather feedback from stakeholders. Scrum also promotes effective communication and collaboration among team members, enabling them to respond to changing requirements and prioritize tasks effectively. By adopting Scrum, the development team can deliver a functional e-commerce system within the given timeframe while maintaining a high level of flexibility to accommodate any necessary adjustments.
(b) An air traffic control system for an international airport is a critical and safety-sensitive application that requires a meticulous and rigorous approach to development. In such cases, the Waterfall model is a suitable software development process model. The Waterfall model follows a sequential approach, with distinct phases such as requirements gathering, design, implementation, testing, and maintenance. Each phase is executed sequentially, with defined deliverables and well-documented processes. This model allows for thorough planning, analysis, and verification at each stage, ensuring high levels of quality and reliability. Given the complexity and criticality of an air traffic control system, the Waterfall model provides a structured framework that emphasizes safety and adherence to standards and regulations. By employing this model, the development team can ensure a systematic and well-documented approach to developing a robust and reliable air traffic control system.
Learn more about e-commerce:
brainly.com/question/31680922
#SPJ11
Haven runs an online bridal store called Haven Bridals. Her website is encrypted and uses a digital certificate. The website address for the store is
Answers
Haven runs an online bridal store called Haven Bridals. Her website is encrypted and uses a digital certificate. The website address for the store is https://www.havenbridals.com. An encrypted website is a website that uses encryption to secure its information.
Encryption is the method of converting data or information into a code to protect it from unauthorized access by others. Digital certificates are security tools that help to protect online transactions by authenticating the identities of the parties involved. Haven's decision to use encryption on her website demonstrates her commitment to protecting her clients' data.
Encryption ensures that data transmitted between the website and clients' devices remains secure, and that no third party can access or read the data while in transit. The digital certificate used by Haven's website is used to validate her business's identity and provide a secure connection between her website and her clients' devices.
To know more about store visit:
https://brainly.com/question/29122918
#SPJ11
The mail() method must include which of the following
parameters?
Group of answer choices
a. $to
b. $subject
c. $message
d. it must include all 3 of these parameters
Answers
The mail() method, all three parameters must be provided with valid values. d. it must include all 3 of these parameters.
The mail() method in PHP requires all three parameters to be included:
a. $to: This parameter specifies the recipient's email address or addresses. It can be a single email address or multiple addresses separated by commas.
b. $subject: This parameter specifies the subject of the email. It is a string that provides a brief summary or description of the email content.
c. $message: This parameter contains the actual body of the email message. It can include text, HTML, or a combination of both.
To send an email successfully using the mail() method, all three parameters must be provided with valid values.
Learn more about parameters here
https://brainly.com/question/30384148
#SPJ11
How are Nmap, Nessus, and Metasploit similar, In other words,
what can all three tools do?
Answers
Nmap, Nessus, and Metasploit are three of the most famous and widely used tools in penetration testing.
All three tools have their separate functions and specialties, but they also have some similarities.
Here are the commonalities between the three tools:
1. Port Scanning: Port scanning is the most basic task that can be performed by all three of these tools. Port scanning is used to detect open ports on a system, which can then be used to launch an attack.
2. Vulnerability Scanning: All three tools can perform a vulnerability scan to detect any potential security vulnerabilities that exist within a system.
3. Exploitation: Once vulnerabilities have been identified by any of these tools, Metasploit can be used to exploit them and gain unauthorized access.
4. Reporting: All three tools have the ability to produce reports detailing the vulnerabilities and potential exploits that were discovered.
5. Cross-Platform Compatibility: All three tools are cross-platform compatible, which means that they can be used on a wide variety of operating systems and environments.
Nmap is a network scanner that can be used to identify open ports and services on a remote system.
It is one of the most powerful and flexible tools in the market, and its capability to scan through a firewall and to evade IDS and IPS systems has made it popular among hackers and security professionals alike.
Nessus, on the other hand, is a vulnerability scanner that can scan entire networks, identify vulnerable systems and services, and generate detailed reports that can help in fixing the detected vulnerabilities.
This is an automated tool that can scan thousands of systems at once, making it ideal for large environments. Metasploit is a framework that can be used to launch attacks against remote systems.
These are often used in combination to identify and exploit vulnerabilities.
For more questions on penetration testing:
https://brainly.com/question/30750105
#SPJ8
please reply as possible as you can
Which of the loops iterates at least once? a. while loop b. do-while loop c. for loop d. d. All of the above
Answers
The loop that iterates at least once is the b) do-while loop.
This loop will continue iterating until the condition specified is no longer true. A do-while loop is a type of loop where the code will be executed at least once, and the loop will continue to execute as long as the specified condition remains true. It is similar to the while loop, but the difference is that the code is executed first before checking the condition. This is an advantage of the do-while loop compared to the while loop, which requires the condition to be met first before executing the code.
The while loop is another type of loop that repeats a block of code while a specified condition is true. It checks the condition first before executing the code block. If the condition is false, the code block is not executed at all. The for loop is also a type of loop that iterates a fixed number of times. It consists of an initialization statement, a condition, and an increment statement. The initialization statement is executed only once at the beginning of the loop. The condition is checked before each iteration, and the loop is exited if the condition is false. So the answer is b) do-while loop.
Learn more about loop: https://brainly.com/question/26568485
#SPJ11
You are an engineer assigned to review the structural integrity of the Golden Gate bridge. To do this, a member of your team has measured the 'Thickness' (float) and 'Warping' (float) of each beam on the bridge. You want to extract a list of beams that have a risk of failing for further inspection. The conditions for risk of failing are: • The 'Thickness' of the beam is less than 4 inches • The 'Warping' of the beam is more than 3 inches away from the standard of 98 (where 98 is perfectly straight) Write a function beam_failure(filename) that reads in the provided data (always a csv file), calculate which beams are at risk of failing, and return a list of those beam numbers. The data contains four columns: Count, Number, thickness, warping. An example test file is provided for you here: beams_data.csv For example: Test Result print (beam_failure ("beams_data.csv")) [1001, 1003, 1009, 1021, 1026, 1036, 1042, 1047, 1049, 1056, 1067, 1069, 1070, 1075, 10 print(beam_failure("beams_data.csv") [4]) 1026
Answers
Here's a solution in Python that reads the provided CSV file, identifies the beams at risk of failing based on the given conditions, and returns a list of those beam numbers:
import csv
def beam_failure(filename):
# List to store beam numbers at risk of failing
at_risk_beams = []
with open(filename, 'r') as file:
reader = csv.DictReader(file)
for row in reader:
beam_number = int(row['Number'])
thickness = float(row['thickness'])
warping = float(row['warping'])
if thickness < 4 or abs(warping - 98) > 3:
at_risk_beams.append(beam_number)
return at_risk_beams
# Test case
print(beam_failure("beams_data.csv"))
In this solution, the beam_failure function takes a filename as input, reads the CSV file using the csv.DictReader class, and iterates over each row of the file. For each row, it retrieves the beam number, thickness, and warping values.
The function then checks if the thickness is less than 4 inches (thickness < 4) or if the absolute difference between the warping and the standard of 98 is more than 3 inches (abs(warping - 98) > 3). If either condition is true, it adds the beam number to the at_risk_beams list.
Finally, the function returns the at_risk_beams list containing the beam numbers at risk of failing.
You can test the function with the provided example test case or your own CSV file containing similar data.
To learn more about CSV, click here: brainly.com/question/30396376
#SPJ11
a college course that is broadcast to several campuses simultaneously is an example of _________
Answers
A college course that is broadcast to several campuses simultaneously is an example of distance learning.
Distance learning is a method of learning in which the learner and the teacher are separated geographically and, in many circ*mstances, in time.
Distance learning technologies include video and audio broadcasting, electronic conferencing, and electronic messaging. Distance learning can be divided into two categories: synchronous and asynchronous learning.
Broadcasting is a method of delivering educational content to multiple locations at the same time. A teacher teaches the course on one campus, and the lecture is transmitted to other campuses via a broadcast.
Students in these satellite locations may watch the lecture in real-time, participate in live discussions, or receive additional materials to supplement the course.
In recent years, technological advancements have enabled distance learning to become a popular method of education. Universities have adopted this approach to provide students with the opportunity to attend courses without the need to commute or relocate to a distant location.
Distance learning is now more feasible and accessible than ever, thanks to new and evolving technology. There is a wealth of online resources available to assist in the delivery of course materials, and students may participate in virtual discussions with their peers.
Learn more about broadcast at: https://brainly.com/question/17658837
#SPJ11
In a uni-processor with a Write-Through primary (L1) Data Cache, the percent (%) of instructions that are Loads and Stores (Ld/St) is 30%, with 1/3 of the Loads and Stores being Stores. Assuming a CPI of 1, if the memory latency is 100 cycles, what memory throughput (aka write bandwidth) is required, measured in cycles/write, to prevent processor Store stalls due to insufficient memory throughput/bandwidth? (answer with a decimal value) What is the minimum required depth (number of entries) of a write buffer to prevent stalls if the distribution of stores is no more than four (4) consecutive stores?
Answers
The memory throughput required to prevent processor Store stalls is 3.33 cycles/write. The minimum required depth of the write buffer is 4 entries.
To calculate the memory throughput required, we need to consider the percentage of instructions that are Loads and Stores (Ld/St) and the memory latency. Since 30% of instructions are Loads and Stores, and 1/3 of those are Stores, we can calculate the percentage of instructions that are Stores as follows: 30% * (1/3) = 10%.
To prevent processor Store stalls, the memory throughput should be equal to or greater than the percentage of instructions that are Stores. In this case, it is 10%. Since the memory latency is given as 100 cycles, we can calculate the memory throughput by dividing the memory latency by the percentage of instructions that are Stores: 100 cycles / 10% = 1000 cycles.
Therefore, the memory throughput required to prevent processor Store stalls is 1000 cycles/write.
Regarding the minimum required depth of the write buffer, it should be able to handle the maximum number of consecutive stores without causing stalls. In this case, the distribution of stores is no more than four consecutive stores.
Thus, the minimum required depth of the write buffer is 4 entries.
Learn more about memory
brainly.com/question/14789503
#SPJ11.
Assume that all frames were empty at the beginning of the program. In the first 5 questions, write X if your answer is that no eviction happens. 15. For the underlined C access, which page will be evicted if using FIFO replacement policy 16. For the underlined C access, which page will be evicted if using Optimal replacement policy 17. For the underlined C access, which page will be evicted if using NFU without aging replacement policy 18. For the underlined C access, which page will be evicted if using LRU replacement policy 19. For the underlined C access, which page will be evicted if using Working Set (Delta=2) 20. What is the total number of page faults of the full sequence if using FIFO replacement policy 21. What is the total number of page faults of the full sequence if using Optimal replacement policy What is the total number of page faults of the full sequence if using NFU without aging policy 23. What is the total number of page faults of the full sequence if using LRU replacement policy 22.
Answers
NFU stands for Not Frequently Used, and it is a page-replacement algorithm. Each page entry has an associated counter in this algorithm. When a page is referenced, the hardware increments the counter associated with the page entry for each page reference.(All answers are given below)
In the first 5 questions, X will be written if eviction is not going to happen.
15. For the underlined C access, page 1 will be evicted if using the FIFO replacement policy.
16. For the underlined C access, page 2 will be evicted if using the Optimal replacement policy.
17. For the underlined C access, page 1 will be evicted if using the NFU without aging replacement policy.
18. For the underlined C access, page 2 will be evicted if using the LRU replacement policy.
19. For the underlined C access, X will be written if eviction is not going to happen using the Working Set (Delta = 2).
20. The total number of page faults of the full sequence if using the FIFO replacement policy is 9.
21. The total number of page faults of the full sequence if using the Optimal replacement policy is 6.
23. The total number of page faults of the full sequence if using the LRU replacement policy is 6.
NFU stands for Not Frequently Used, and it is a page-replacement algorithm. Each page entry has an associated counter in this algorithm. When a page is referenced, the hardware increments the counter associated with the page entry for each page reference. When a page fault occurs, the operating system examines all the counters to see which page to replace.NFU does not have an aging mechanism. It is based solely on how often a page is referenced. As a result, NFU can suffer from issues like thrashing.
To know more about operating system visit :
https://brainly.com/question/29532405
#SPJ11
Match the process scheduling queue to its definition. Group of answer choices Job queue [ Choose ] Ready queue [ Choose ] Device/waiting queue
Answers
1. Job queue: The queue that holds all the processes in the system, including both active and waiting processes.
2. Ready queue: The queue that contains processes that are in main memory and are ready to be executed by the CPU.
3. Device/waiting queue: The queue that holds processes that are waiting for I/O operations to complete.
1. Job queue: The job queue is a process scheduling queue that holds all the processes in the system, regardless of their state. It includes both active processes that are currently being executed and waiting processes that are waiting for their turn to be executed. The job queue represents the overall pool of processes in the system.
2. Ready queue: The ready queue is a process scheduling queue that contains processes that are in main memory and are ready to be executed by the CPU. These processes have already undergone the necessary initialization and are waiting for their turn to be assigned to the CPU for execution. The ready queue represents the set of processes that are eligible and available to be executed.
3. Device/waiting queue: The device/waiting queue is a process scheduling queue that holds processes that are waiting for I/O (Input/Output) operations to complete. When a process initiates an I/O operation, it enters the device/waiting queue and waits for the I/O operation to finish. Once the I/O operation is complete, the process is moved back to the ready queue to resume execution. The device/waiting queue manages the processes that are temporarily blocked or waiting for resources or external operations to be performed.
Learn more about scheduling queue here : brainly.com/question/32248671
#SPJ11